2022 publications

  1. Ahmad, F., Tanguy, S., Dubreuil, A., Magnin, A., Faucheron, J.-L. and de Loubens, C. [2022], ‘Flow simulations of rectal evacuation: towards a quantitative evaluation from video defaecography’, INTERFACE FOCUS 12(6).

  2. Ako, K., Elmarhoum, S. and Munialo, C. D. [2022], ‘The determination of the lower critical concentration temperature and intrinsic viscosity: The syneresis reaction of polymeric gels’, FOOD HYDROCOLLOIDS 124(B).

  3. Amato, G., Ando, E., Lyu, C., Viggiani, G. and Eiksund, G. R. [2022], ‘A glimpse into rapid freezing processes in clay with x-ray tomography’, ACTA GEOTECHNICA 17(1), 327–338.

  4. Amroune, S., Bezazi, A., Dufresne, A., Scarpa, F. and Imad, A. [2022], ‘Investigation on microstructure, tensile properties and fatigue characterization of porous date palm fiber’, JOURNAL OF NATURAL FIBERS 19(17), 15751–15764.

  5. Angriman, S., Ferran, A., Zapata, F., Cobelli, P. J., Obligado, M. and Mininni, P. D. [2022], ‘Clustering in laboratory and numerical turbulent swirling flows’, JOURNAL OF FLUID MECHANICS 948.

  6. Aouay, M., Magnin, A., Putaux, J.-L. and Boufi, S. [2022], ‘Crosslinkable dextrin-coated latex via surfactant-free emulsion polymerization’, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS 632.

  7. Audemar, V., Podgorski, T. and Coupier, G. [2022], ‘Rheology and structure of a suspension of deformable particles in plane poiseuille flow’, PHYSICS OF FLUIDS 34(4).

  8. Balbinot, C., Martoia, F., Dumont, P. J. J., Orgeas, L., Bloch, J.-F., du Roscoat, S. R., Boller, E., Flin, F., Carion, P. and Latil, P. [2022], ‘In situ 3d observations of capillary-driven flows in parallel arrangements of rigid fibres using x-ray microtomography’, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 157.

  9. Bezazi, A., Boumediri, H., del Pino, G. G., Bezzazi, B., Scarpa, F., Reis, P. N. B. and Dufresne, A. [2022], ‘Alkali treatment effect on physicochemical and tensile properties of date palm rachis fibers’, JOURNAL OF NATURAL FIBERS 19(10), 3770–3787.

  10. Birmpilis, G., Mohammadi, A. S., Villanova, J., Boller, E., Ando, E. and Dijkstra, J. [2022], ‘Fabric investigation of natural sensitive clay from 3d nano- and microtomography data’, JOURNAL OF ENGINEERING MECHANICS 148(2).

  11. Bouvet, L., Calonne, N., Flin, F. and Geindreau, C. [2022], ‘Snow equitemperature metamorphism described by a phase-field model applicable on micro-tomographic images: Prediction of microstructural and transport properties’, JOURNAL OF ADVANCES IN MODELING EARTH SYSTEMS 14(9).

  12. Bouzidi, K., Chaussy, D., Gandini, A., Bongiovanni, R. and Beneventi, D. [2022], ‘3d printable fully biomass-based composite using poly(furfuryl alcohol) as binder and cellulose as a filler’, CARBOHYDRATE POLYMERS 293.

  13. Bouzidi, K., Chaussy, D., Gandini, A., Flahaut, E., Bongiovanni, R. and Beneventi, D. [2022], ‘Bio-based formulation of an electrically conductive ink with high potential for additive manufacturing by direct ink writing’, COMPOSITES SCIENCE AND TECHNOLOGY 230(1).

  14. Bui, H. P., Richefeu, V. and Dufour, F. [2022], ‘Microstructural dimension involved in the damage of concrete-like materials: An examination by the lattice element method’, INTERNATIONAL JOURNAL OF DAMAGE MECHANICS 31(4), 532–556.

  15. Caglar, B., Broggi, G., Ali, M. A., Orgegas, L. and Michaud, V. [2022], ‘Deep learning accelerated prediction of the permeability of fibrous microstructures’, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 158.

  16. Calonne, N., Burr, A., Philip, A., Flin, F. and Geindreau, C. [2022], ‘Effective coefficient of diffusion and permeability of firn at dome c and lock in, antarctica, and of various snow types - estimates over the 100-850 kg m(-3) density range’, CRYOSPHERE 16(3), 967–980.

  17. Capogna, A., Doche, O., Tardu, S., Schillings, J. and Davoust, L. [2022], ‘Effect of a localized mhd body force on near-wall turbulence’, MAGNETOHYDRODYNAMICS 58(1-2), 125–132.

  18. Chachanidze, R., Xie, K., Massaad, H., Roux, D., Leonetti, M. and de Loubens, C. [2022], ‘Structural characterization of the interfacial self-assembly of chitosan with oppositely charged surfactant’, JOURNAL OF COLLOID AND INTERFACE SCIENCE 616, 911–920.

  19. Chavan, P., Sinhmar, A., Sharma, S., Dufresne, A., Thory, R., Kaur, M., Sandhu, K. S., Nehra, M. and Nain, V. [2022], ‘Nanocomposite starch films: A new approach for biodegradable packaging materials’, STARCH-STARKE 74(5-6).

  20. Chelly, H., Jahangiri, A., Mireux, M., Etienne, J., Dysthe, D. K., Verdier, C. and Recho, P. [2022], ‘Cell crawling on a compliant substrate: A biphasic relation with linear friction’, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS 139.

  21. Couture, C. and Besuelle, P. [2022], ‘A true triaxial experimental study on porous vosges sandstone: from strain localization precursors to failure using full-field measurements’, INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES 153.

  22. Curmi, H., Chirat, C., Roubaud, A., Peyrot, M., Haarlemmer, G. and Lachenal, D. [2022], ‘Extraction of phenolic compounds from sulfurfree black liquor thanks to hydrothermal treatment before the production of syngas for biofuels’, JOURNAL OF SUPERCRITICAL FLUIDS 181.

  23. Davoust, L. and Vazquez, P. A. [2022], Thermoelectrohydrodynamics (tehd) applied to jet micro-pumping, in ‘2022 IEEE 21ST INTERNATIONAL CONFERENCE ON DIELECTRIC LIQUIDS (ICDL)’, IEEE International Conference on Dielectric Liquids, IEEE; IEEE Dielectr & Elect Insulat Soc; Univ Sevilla. IEEE 21st International Conference on Dielectric Liquids (ICDL), Sevilla, SPAIN,MAY 29-JUN 02, 2022.

  24. Depriester, D., du Roscoat, S. R., Orgeas, L., Geindreau, C., Levrard, B. and Bremond, F. [2022], ‘Individual fibre separation in 3d fibrous materials imaged by x-ray tomography’, JOURNAL OF MICROSCOPY 286(3), 220–239.

  25. Di Donna, A., Charrier, P., Dijkstra, J., Ando, E. and Besuell, P. [2022], ‘The contribution of swelling to self-sealing of claystone studied through x-ray tomography’, PHYSICS AND CHEMISTRY OF THE EARTH 127.

  26. Dias, M. C., Belgacem, M. N., De Resende, J. V., Martins, M. A., Damasio, R. A. P., Tonoli, G. H. D. and Ferreira, S. R. [2022], ‘Eco-friendly laccase and cellulase enzymes pretreatment for optimized production of high content lignin-cellulose nanofibrils’, INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES 209(A), 413–425.

  27. Dias, M. C., Zidanes, U. L., Nemer Martins, C. C., Matos de Oliveira, A. L., Pereira Damasio, R. A., de Resende, J. V., de Barros Vilas Boas, E. V., Belgacem, M. N., Denzin Tonoli, G. H. and Ferreira, S. R. [2022], ‘Influence of hemicellulose content and cellulose crystal change on cellulose nanofibers properties’, INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES 213, 780–790.

  28. Eames, I. and Flor, J.-B. [2022], ‘Spread of infectious agents through the air in complex spaces’, INTERFACE FOCUS 12(2).

  29. Fierling, J., John, A., Delorme, B., Torzynski, A., Blanchard, G., Lye, C., Malandain, G., Sanson, B., Etienne, J., Marmottant, P., Quilliet, C., Rauzi, M. and Popkova, A. [2022], ‘Embryo-scale epithelial buckling forms a propagating furrow that initiates gastrulation’, NATURE COMMUNICATIONS 13(1).

  30. Geindreau, C., Emeriault, F., Dadda, A., Yaba, O., Spadini, L., Filet, A. E. and Garandet, A. [2022], ‘Mechanical and microstructural changes of biocemented sand subjected to an acid solution’, INTERNATIONAL JOURNAL OF GEOMECHANICS 22(3).

  31. Hachaichi, A., Nekkaa, S., Amroune, S., Jawaid, M., Alothman, O. Y. and Dufresne, A. [2022], ‘Effect of alkali surface treatment and compatibilizer agent on tensile and morphological properties of date palm fibers-based high density polyethylene biocomposites’, POLYMER COMPOSITES 43(10), 7211–7221.

  32. Haffar, I., Flin, F., Geindreau, C., Petillon, N., Gervais, P.-C. and Edery, V. [2022], ‘3d microstructure evolution of ice in jet a-1 fuel as a function of applied temperature over time’, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 183(B).

  33. Haffar, I., Latil, P., Flin, F., Geindreau, C., Bonnel, F., Petillon, N., Gervais, P.-C. and Edery, V. [2022], ‘Characterization of ice particles in jet fuel at low temperature: 3d x-ray tomography vs. 2d high-speed imaging’, POWDER TECHNOLOGY 397.

  34. Hojeij, A., Jossic, L., Sechet, P., Bonamy, C., Magnin, A. and Hattou, S. [2022], ‘Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the openfoam software’, AICHE JOURNAL 68(2).

  35. Hojeij, A., Jossic, L., Sechet, P., Magnin, A. and Hattou, S. [2022], ‘Agitation of yield stress fluids by gas injection’, AICHE JOURNAL 68(4).

  36. Ivankovic, T., Rajic, A., Razic, S. E., du Roscoat, S. R. and Skenderi, Z. [2022], ‘Antibacterial properties of non-modified wool, determined and discussed in relation to iso 20645:2004 standard’, MOLECULES 27(6).

  37. Khadraoui, M., Khiari, R., Bergaoui, L. and Mauret, E. [2022], ‘Production of lignin-containing cellulose nanofibrils by the combination of different mechanical processes’, INDUSTRIAL CROPS AND PRODUCTS 183.

  38. Khadraoui, M., Khiari, R., Brosse, N., Bergaoui, L. and Mauret, E. [2022], ‘Combination of steam explosion and tempo-mediated oxidation as pretreatments to produce nanofibril of cellulose from posidonia oceanica bleached fibres’, BIORESOURCES 17(2), 2933–2958.

  39. Koppolu, R., Banvillet, G., Ghimire, H., Bras, J. and Toivakka, M. [2022], ‘Enzymatically pretreated high-solid-content nanocellulose for a high-throughput coating process’, ACS APPLIED NANO MATERIALS 5(8), 11302–11313.

  40. Laforgue, L., Fertin, A., Usson, Y., Verdier, C. and Laurent, V. M. [2022], ‘Efficient deformation mechanisms enable invasive cancer cells to migrate faster in 3d collagen networks’, SCIENTIFIC REPORTS 12(1).

  41. Lalloz, S. and Davoust, L. [2022], ‘Contactless electrostatic shaping of a capillary jet for drop-on-demand purposes’, PHYSICS OF FLUIDS 34(1).

  42. Latil, P., Zennoune, A., Ndoye, F.-T., Flin, F., Geindreau, C. and Benkhelifa, H. [2022], ‘X-ray microtomography of ice crystal formation and growth in a sponge cake during its freezing and storage’, JOURNAL OF FOOD ENGINEERING 325.

  43. Lefebvre, A., Mezui, Y., Obligado, M., Gluck, S. and Cartellier, A. [2022], ‘A new, optimized doppler optical probe for phase detection, bubble velocity and size measurements: Investigation of a bubble column operated in the heterogeneous regime’, CHEMICAL ENGINEERING SCIENCE 250.

  44. Ma, C., Di Donna, A. and Dias, D. [2022], ‘Numerical study on the thermo-hydro-mechanical behaviour of an energy tunnel in a coarse soil’, COMPUTERS AND GEOTECHNICS 151.

  45. Maitrejean, G., Samson, A. and Roux, D. C. D. [2022], ‘Dataset of numerically-generated interfaces of newtonian jets in cij regime’, DATA IN BRIEF 42.

  46. Maitrejean, G., Samson, A., Roux, D. C. D. and El-Kissi, N. [2022], ‘Rheological identification of jetted fluid using machine learning’, PHYSICS OF FLUIDS 34(9).

  47. Maleki, M., de Loubens, C. and Bodiguel, H. [2022], ‘Viscous resuspension of droplets’, PHYSICAL REVIEW FLUIDS 7(1).

  48. Martoia, F., Gupta, S., Dumont, P. J. J. and Orgeas, L. [2022], ‘Rheology of concentrated and highly concentrated enzymatic cellulose nanofibril hydrogels during lubricated compression’, CARBOHYDRATE POLYMERS 296.

  49. Mejean, S., Guillard, F., Faug, T. and Einav, I. [2022], ‘X-ray study of fast and slow granular flows with transition jump in between’, GRANULAR MATTER 24(1).

  50. Mezui, Y., Obligado, M. and Cartellier, A. [2022], ‘Buoyancy-driven bubbly flows: scaling of velocities in bubble columns operated in the heterogeneous regime’, JOURNAL OF FLUID MECHANICS 952.

  51. Michel, B., Heggset, E. B., Syverud, K., Dufresne, A. and Bras, J. [2022], ‘Inclusion complex formation between sulfadiazine and various modified beta-cyclodextrins and characterization of the complexes’, JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY 76.

  52. Mnasri, A., Dhaouadi, H., Khiari, R., Halila, S. and Mauret, E. [2022], ‘Effects of deep eutectic solvents on cellulosic fibres and paper properties: Green “chemical” refining’, CARBOHYDRATE POLYMERS 292.

  53. Nader, S., Brosse, N., Daas, T. and Mauret, E. [2022], ‘Lignin containing micro and nano-fibrillated cellulose obtained by steam explosion: Comparative study between different processes’, CARBOHYDRATE POLYMERS 290.

  54. Nader, S., Brosse, N., Khadraoui, M., Fuentealba, C., Ziegler-Devin, I., Quiles, F., El-Kirat-Chatel, S. and Mauret, E. [2022], ‘A low-cost environmentally friendly approach to isolate lignin containing micro and nanofibrillated cellulose from eucalyptus globulus bark by steam explosion’, CELLULOSE 29(10), 5593–5607.

  55. Nader, S., Guzman, F., Becar, R., Segovia, C., Fuentealba, C., Peirera, M., Mauret, E. and Brosse, N. [2022], ‘Lignocellulosic micro and nanofibrillated cellulose produced by steam explosion for wood adhesive formulations’, JOURNAL OF RENEWABLE MATERIALS 10(2), 263–271.

  56. Nascimento, D. M. d., Nunes, Y. L., Feitosa, J. P. A., Dufresne, A. and Rosa, M. d. F. [2022], ‘Cellulose nanocrystals-reinforced core-shell hydrogels for sustained release of fertilizer and water retention’, INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES 216, 24–31.

  57. Negretti, M. E., Martin, A. and Naaim-Bouvet, F. [2022], ‘Simultaneous velocity-density measurements of downslope density clouds’, ADVANCES IN WATER RESOURCES 164.

  58. Orgeas, L., Gupta, S., Martoia, F. and Dumont, P. J. J. [2022], ‘Ice-templating hydrogels with high concentrations of cellulose nanofibers to produce architected cellular materials for structural applications’, MATERIALS & DESIGN 223.

  59. Patouillet, K., Davoust, L. and Doche, O. [2022], ‘A revised dealgrove model and mhd considerations for modeling the surface flow of oxidised molten aluminum alloy’, MAGNETOHYDRODYNAMICS 58(1-2), 133–140.

  60. Puthumana Melepattu, M. and de Loubens, C. [2022], ‘Steady streaming flow induced by active biological microstructures; application to small intestine villi’, PHYSICS OF FLUIDS 34(6).

  61. Rodriguez-Ramirez, C. A., Dufresne, A., D’Accorso, N. and Lis Garcia, N. [2022], ‘Alternative modification by grafting in bamboo cellulose nanofibrils: A potential option to improve compatibility and tunable surface energy in bionanocomposites’, INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES 211, 626–638.

  62. Rousseau, H., Chauchat, J. and Frey, P. [2022], ‘Experiments on a single large particle segregating in bedload transport’, PHYSICAL REVIEW FLUIDS 7(6).

  63. Roy, N., Frost, J. D. and Viggiani, G. [2022], ‘Pore space evolution of granular assemblies under shear: an experimental study using x-ray tomography’, GRANULAR MATTER 24(2).

  64. Sabando, C., Bouza, R., Rodriguez-Llamazares, S., Pettinelli, N., Ide, W., Barral, L., Linares, A., Quiroga, R., Castano, J., Muller, N. and Dufresne, A. [2022], ‘Donut-shaped microparticles prepared from different c-type starch sources: Characterization and encapsulation of gallic acid’, ACS FOOD SCIENCE & TECHNOLOGY 2(5), 862–871.

  65. Sarkis, M., Abbas, M., Naillon, A., Emeriault, F., Geindreau, C. and Esnault-Filet, A. [2022], ‘Dem modeling of biocemented sand: Influence of the cohesive contact surface area distribution and the percentage of cohesive contacts’, COMPUTERS AND GEOTECHNICS 149.

  66. Shahin, G., Papazoglou, A., Marinelli, F., Viggiani, G. and Buscarnera, G. [2022], ‘Experimental study of compaction localization in carbonate rock and constitutive modeling of mechanical anisotropy’, INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS 46(13), 2561–2581.

  67. Srimasorn, S., Souter, L., Green, D. E., Djerbal, L., Goodenough, A., Duncan, J. A., Roberts, A. R. E., Zhang, X., Debarre, D., DeAngelis, P. L., Kwok, J. C. F. and Richter, R. P. [2022], ‘A quartz crystal microbalance method to quantify the size of hyaluronan and other glycosaminoglycans on surfaces’, SCIENTIFIC REPORTS 12(1).

  68. Terzolo, A., Bailly, L., Orgeas, L., Cochereau, T. and Bernardoni, N. H. [2022], ‘A micro-mechanical model for the fibrous tissues of vocal folds’, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS 128.

  69. Trigui, K., Magnin, A., Putaux, J.-L. and Boufi, S. [2022], ‘Twin-screw extrusion for the production of nanocellulose-pva gels with a high solid content’, CARBOHYDRATE POLYMERS 286.

  70. Tsvirkun, D., Revilloud, J., Giannetti, A. and Verdier, C. [2022], ‘The intriguing role of collagen on the rheology of cancer cell spheroids’, JOURNAL OF BIOMECHANICS 141.

  71. Vego, I., Tengattini, A., Ando, E., Lenoir, N. and Viggiani, G. [2022], ‘The effect of high relative humidity on a network of water-sensitive particles (couscous) as revealed by in situ x-ray tomography’, SOFT MATTER 18(25), 4747–4755.

  72. Verdier, C. [2022], ‘Biomechanics of transendothelial migration by cancer cells’, BIOCELL 46(11), 2381–2386.

  73. Villette, F., du Roscoat, S. R., Dufour, F., Bloch, J.-F., Baroth, J. and Carre, B. [2022], ‘Toward the link between structural and mechanical properties of fiber aggregates in paper materials’, JOURNAL OF MATERIALS SCIENCE 57(15), 7587–7599.

  74. Vilotte, A., de Loubens, C., Gunes, D. Z., Schmitt, C. and Bodiguel, H. [2022], ‘Hydrodynamic spinning of protein fractal aggregates into core-shell fibers’, ACS APPLIED POLYMER MATERIALS 4(6), 4075– 4080.

  75. Wang, R., Pinzon, G., Ando, E. and Viggiani, G. [2022], ‘Modeling combined fabric evolution in an anisometric granular material driven by particle-scale x-ray measurements’, JOURNAL OF ENGINEERING MECHANICS 148(1).

  76. Yin, Q., Ando, E., Viggiani, G. and Sun,W. [2022], ‘Freezing-induced stiffness and strength anisotropy in freezing clayey soil: Theory, numerical modeling, and experimental validation’, INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS 46(11), 2087–2114.

  77. Zhang, J., Dias, D., Pan, Q., Ma, C. and Tsuha, C. d. H. C. [2022], ‘Long-term thermo-hydraulic numerical assessment of thermo-active piles-a case of tropical soils’, APPLIED SCIENCES-BASEL 12(15).

  78. Zhang, J., Jenck, O. and Dias, D. [2022], ‘3d numerical analysis of a single footing on soft soil reinforced by rigid inclusions’, INTERNATIONAL JOURNAL OF GEOMECHANICS 22(8).

  79. Zhang, M., Fan, X., Guo, W., Zhou, H., Li, Z., Ma, Y., Yan, C. and Dufresne, A. [2022], ‘Insights into stereocomplexation of poly(lactic acid) materials: Evolution of interaction between enantiomeric chains and its role in conformational transformation in racemic blends’, ACS APPLIED POLYMER MATERIALS 4(8), 5891–5900
  80. Zhu, G. and Dufresne, A. [2022], ‘Synergistic reinforcing and cross- linking effect of thiol-ene-modified cellulose nanofibrils on natural rubber’, CARBOHYDRATE POLYMERS 278.

  81. Zhu, G., Isaza, L. G., Huang, B. and Dufresne, A. [2022], ‘Multifunctional nanocellulose/carbon nanotube composite aerogels for highefficiency electromagnetic interference shielding’, ACS SUSTAINABLE CHEMISTRY & ENGINEERING 10(7), 2397–2408.

2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014