2017 publications

  1. Ando, E., Salvatore, E., Desrues, J., Charrier, P., Toni, J. B., Modoni, G. and Viggiani, G. [2017], Strain localisation in sand in cycles of triaxial compression and extension: Continuum and grain-scale analysis, in E. Papamichos, P. Papanastasiou, E. Pasternak and A. Dyskin, eds, ‘BIFURCATION AND DEGRADATION OF GEOMATERIALS WITH ENGINEERING APPLICATIONS’, Springer Series in Geomechanics and Geoengineering, Univ Cyprus; Aristotle Univ Thessaloniki; Univ Western Australia; Cyprus Tourism Org; ALERT Geomaterials; SINTEF Petr Res; MTS Syst; Themeliotechniki Cyprus Ltd; Dreamscape Conf, pp. 489–497. 11th International Workshop on Bifurcation and Degradation in Geomaterials (IWBDG), Limassol, CYPRUS, MAY 21- 25, 2017.

  2. Ayela, F., Cherief,W., Colombet, D., Ledoux, G., Martini, M., Mossaz, S., Podbevsek, D., Qiu, X. and Tillement, O. [2017], ‘Hydrodynamic cavitation through “labs on a chip”: From fundamentals to applications’, OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES 72(4).

  3. Baati, R., Magnin, A. and Boufi, S. [2017], ‘High solid content production of nanofibrillar cellulose via continuous extrusion’, ACS SUSTAINABLE CHEMISTRY & ENGINEERING 5(3), 2350–2359.

  4. Baker, N. T., Potherat, A., Davoust, L., Debray, F. and Klein, R. [2017], ‘Controlling the dimensionality of low-rm mhd turbulence experimentally’, EXPERIMENTS IN FLUIDS 58(7).

  5. Bernabeu, N., Budenkova, O., Gagnoud, A., Rukolaine, S., Couvat, Y. D. T. and Fautrelle, Y. [2017], ‘Modelling of coupled convective and magneto-thermoelectric phenomena for a sphere immersed in liquid metal using finite element method and adaptive meshes’, MAGNETOHYDRODYNAMICS 53(1, SI), 149–158. 10th Pamir International Conference on Fundamentals and Applied MagnetoHydroDynamics (PAMIR), Cagliari, ITALY, JUN 20-24, 2016.

  6. Bideau, B., Bras, J., Adoui, N., Loranger, E. and Daneault, C. [2017], ‘Polypyrrole/nanocellulose composite for food preservation: Barrier and antioxidant characterization’, FOOD PACKAGING AND SHELF LIFE 12, 1–8.

  7. Bonilla-Sierra, V., Elmouttie, M., Donze, F.-V. and Scholtes, L. [2017], ‘Composite wedge failure using photogrammetric measurements and dfn-dem modelling’, JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING 9(1), 41–53.

  8. Budenkova, O., Bernabeu, N., Rukolaine, S., Couvat, Y. D. T., Gagnoud, A., Tarpagkou, R. and Fautrelle, Y. [2017], ‘Thermoelectric problem for an axisymmetric ellipsoid particle in the liquid metal: Analytical solution and numerical modeling’, APPLIED MATHEMATICAL MODELLING 45, 590–605.

  9. Chauchat, J., Cheng, Z., Nagel, T., Bonamy, C. and Hsu, T.-J. [2017], ‘Sedfoam-2.0: a 3-d two-phase flow numerical model for sediment transport’, GEOSCIENTIFIC MODEL DEVELOPMENT 10(12), 4367– 4392.

  10. Chirat, C. [2017], ‘Use of vegetal biomass for biofuels and bioenergy. competition with the production of bioproducts and materials?’, COMPTES RENDUS PHYSIQUE 18(7-8), 462–468.

  11. Colombet, D., Da Silva, E. G. and Fortes-Patella, R. [2017], ‘On numerical simulation of cavitating flows under thermal regime’, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 105, 411– 428.

  12. Dadda, A., Geindreau, C., Emeriault, F., du Roscoat, S. R., Garandet, A., Sapin, L. and Filet, A. E. [2017], ‘Characterization of microstruc- tural and physical properties changes in biocemented sand using 3d x-ray microtomography’, ACTA GEOTECHNICA 12(5), 955–970.

  13. Davoust, L., Fouillet, Y., Malk, R. and Theisen, J. [2017], ‘A review on ac electrodynamics at drop scale: Electrowetting, capillary resonance and streaming-induced stirring’, MAGNETOHYDRODYNAMICS 53(2, SI), 373–381.

  14. Deloule, V., Chirat, C., Boisset, C., Toussaint, B. and Chroboczek, J. [2017], ‘Production of hemicellulose oligomers from softwood chips using autohydrolysis followed by an enzymatic post-hydrolysis’, HOLZFORSCHUNG 71(7-8, SI), 575–581. 14th European Workshop on Lignocellulosics and Pulp (EWLP), Autrans, FRANCE, JUN, 2016.

  15. Desmaisons, J., Boutonnet, E., Rueff, M., Dufresne, A. and Bras, J. [2017], ‘A new quality index for benchmarking of different cellulose nanofibrils’, CARBOHYDRATE POLYMERS 174, 318–329.

  16. Desrues, J., Ando, E., Besuelle, P., Viggiani, G., Debove, L., Charrier, P. and Toni, J. B. [2017], Localisation precursors in geomaterials?, in E. Papamichos, P. Papanastasiou, E. Pasternak and A. Dyskin, eds, ‘BIFURCATION AND DEGRADATION OF GEOMATERIALS WITH ENGINEERING APPLICATIONS’, Springer Series in Geomechanics and Geoengineering, Univ Cyprus; Aristotle Univ Thessaloniki; Univ Western Australia; Cyprus Tourism Org; ALERT Geomaterials; SINTEF Petr Res; MTS Syst; Themeliotechniki Cyprus Ltd; Dreamscape Conf, pp. 3–10. 11th InternationalWorkshop on Bifurcation and Degradation in Geomaterials (IWBDG), Limassol, CYPRUS, MAY 21-25, 2017.

  17. Dicko, M., Saramito, P., Blanchard, G. B., Lye, C. M., Sanson, B. and Etienne, J. [2017], ‘Geometry can provide long-range mechanical guidance for embryogenesis’, PLOS COMPUTATIONAL BIOLOGY 13(3).

  18. Dufresne, A. [2017], ‘Cellulose nanomaterial reinforced polymer nanocomposites’, CURRENT OPINION IN COLLOID & INTERFACE SCIENCE 29, 1–8.

  19. Dufresne, A. and Castano, J. [2017], ‘Polysaccharide nanomaterial reinforced starch nanocomposites: A review’, STARCH-STARKE 69(1-2, SI).

  20. El Dandachy, M. E., Briffaut, M., Dufour, F. and Dal Pont, S. [2017], ‘An original semi-discrete approach to assess gas conductivity of concrete structures’, INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS 41(6), 940–956.

  21. Flormann, D., Aouane, O., Kaestner, L., Ruloff, C., Misbah, C., Podgorski, T. and Wagner, C. [2017], ‘The buckling instability of aggregating red blood cells’, SCIENTIFIC REPORTS 7.

  22. Freydier, P., Chambon, G. and Naaim, M. [2017], ‘Experimental characterization of velocity fields within the front of viscoplastic surges down an incline’, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS 240, 56–69.

  23. Gallien, B., Bailly, S. and Duffar, T. [2017], ‘Comparative study of dislocation density characterizations on silicon’, CRYSTAL RESEARCH AND TECHNOLOGY 52(1, SI).
  24. Garcia, A., Labidi, J., Belgacem, M. N. and Bras, J. [2017], ‘The nanocellulose biorefinery: woody versus herbaceous agricultural wastes for ncc production’, CELLULOSE 24(2), 693–704.

  25. Genthial, R., Beaurepaire, E., Schanne-Klein, M.-C., Peyrin, F., Farlay, D., Olivier, C., Bala, Y., Boivin, G., Vial, J.-C., Debarre, D. and Gourrier, A. [2017], ‘Label-free imaging of bone multiscale porosity and interfaces using third-harmonic generation microscopy’, SCIENTIFIC REPORTS 7.

  26. Hoeng, F., Bras, J., Gicquel, E., Krosnicki, G. and Denneulin, A. [2017], ‘Inkjet printing of nanocellulose-silver ink onto nanocellulose coated cardboard’, RSC ADVANCES 7(25), 15372–15381.

  27. Hoeng, F., Denneulin, A., Reverdy-Bruas, N., Krosnicki, G. and Bras, J. [2017], ‘Rheology of cellulose nanofibrils/silver nanowires suspension for the production of transparent and conductive electrodes by screen printing’, APPLIED SURFACE SCIENCE 394, 160–168.

  28. Hosn, R. A., Sibille, L., Benahmed, N. and Chareyre, B. [2017], ‘Discrete numerical modeling of loose soil with spherical particles and interparticle rolling friction’, GRANULAR MATTER 19(1).

  29. Jin, Y., Hengl, N., Baup, S., Maitrejean, G. and Pignon, F. [2017], ‘Modeling and analysis of concentration profiles obtained by in-situ saxs during cross-flow ultrafiltration of’, JOURNAL OF MEMBRANE SCIENCE 528, 34–45.

  30. Kneib, F., Faug, T., Nicolet, G., Eckert, N., Naaim, M. and Dufour, F. [2017], ‘Force fluctuations on a wall in interaction with a granular lid-driven cavity flow’, PHYSICAL REVIEW E 96(4).

  31. Kunhappan, D., Harthong, B., Chareyre, B., Balarac, G. and Dumont, P. J. J. [2017], ‘Numerical modeling of high aspect ratio flexible fibers in inertial flows’, PHYSICS OF FLUIDS 29(9).

  32. Lukic, B., Saletti, D. and Forquin, P. [2017], ‘Use of simulated experiments for material characterization of brittle materials subjected to high strain rate dynamic tension’, PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES 375(2085).

  33. Luu, L. H., Philippe, P. and Chambon, G. [2017], ‘Flow of a yieldstress fluid over a cavity: Experimental study of the solid-fluid interface’, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS 245, 25–37.

  34. Maache, M., Bezazi, A., Amroune, S., Scarpa, F. and Dufresne, A. [2017], ‘Characterization of a novel natural cellulosic fiber from juncus effusus l.’, CARBOHYDRATE POLYMERS 171, 163–172.

  35. Machicoane, N., Lopez-Caballero, M., Bourgoin, M., Aliseda, A. and Volk, R. [2017], ‘A multi-time-step noise reduction method for measuring velocity statistics from particle tracking velocimetry’, MEASUREMENT SCIENCE AND TECHNOLOGY 28(10).

  36. Mariano, M., Pilate, F., de Oliveira, F. B., Khelifa, F., Dubois, P., Raquez, J.-M. and Dufresne, A. [2017], ‘Preparation of cellulose nanocrystal-reinforced poly(lactic acid) nanocomposites through noncovalent modification with plla-based surfactants’, ACS OMEGA 2(6), 2678–2688.

  37. Martoia, F., Orgeas, L., Dumont, P. J. J., Bloch, J. F., Flin, F. and Viguie, J. [2017], ‘Crumpled paper sheets: Low-cost biobased cellular materials for structural applications’, MATERIALS & DESIGN 136, 150–164.

  38. Mathlouthi, C., Hugenel, F., Delpech, F. and Rharbi, Y. [2017], ‘Heat capacity of confined polystyrene in close-packed particles’, MACROMOLECULES 50(1), 472–481.

  39. Mejean, S., Faug, T. and Einav, I. [2017], ‘A general relation for standing normal jumps in both hydraulic and dry granular flows’, JOURNAL OF FLUID MECHANICS 816, 331–351.

  40. Metivier, C., Li, C. and Magnin, A. [2017], ‘Origin of the onset of rayleigh-benard convection in a concentrated suspension of microgels with a yield stress behavior’, PHYSICS OF FLUIDS 29(10).

  41. Monica Bravo-Anaya, L., Rebeca Macias, E., Humberto Perez- Lopez, J., Galliard, H., Roux, D. C. D., Landazuri, G., Carvajal Ramos, F., Rinaudo, M., Pignon, F. and Armando Soltero, J. F. [2017], ‘Supramolecular organization in calf-thymus dna solutions under flow in dependence with dna concentration’, MACROMOLECULES 50(20), 8245–8257.

  42. Mossaz, S., Colombet, D. and Ayela, F. [2017], ‘Hydrodynamic cavitation of binary liquid mixtures in laminar and turbulent flow regimes’, EXPERIMENTAL THERMAL AND FLUID SCIENCE 80, 337–347.

  43. Moustafa, H., El Kissi, N., Abou-Kandil, A. I., Abdel-Aziz, M. S. and Dufresne, A. [2017], ‘Pla/pbat bionanocomposites with antimicrobial natural rosin for green packaging’, ACS APPLIED MATERIALS & INTERFACES 9(23), 20132–20141.

  44. Moustafa, H., Galliard, H., Vidal, L. and Dufresne, A. [2017], ‘Facile modification of organoclay and its effect on the compatibility and properties of novel biodegradable pbe/pbat nanocomposites’, EUROPEAN POLYMER JOURNAL 87, 188–199.

  45. Moustafa, H., Guizani, C. and Dufresne, A. [2017], ‘Sustainable biodegradable coffee grounds filler and its effect on the hydrophobicity, mechanical and thermal properties of biodegradable pbat composites’, JOURNAL OF APPLIED POLYMER SCIENCE 134(8).

  46. Moustafa, H., Guizani, C., Dupont, C., Martin, V., Jeguirim, M. and Dufresne, A. [2017], ‘Utilization of torrefied coffee grounds as reinforcing agent to produce high-quality biodegradable pbat composites for food packaging applications’, ACS SUSTAINABLE CHEMISTRY & ENGINEERING 5(2), 1906–1916.

  47. Nagalakshmaiah, M., Nechyporehuk, O., El Kissi, N. and Dufresne, A. [2017], ‘Melt extrusion of polystyrene reinforced with cellulose nanocrystals modified using poly[(styrene)-co-(2-ethylhexyl acrylate)] latex particles’, EUROPEAN POLYMER JOURNAL 91, 297–306.

  48. Rajan, V. S., Laurent, V. M., Verdier, C. and Duperray, A. [2017], ‘Unraveling the receptor-ligand interactions between bladder can- cer cells and the endothelium using afm’, BIOPHYSICAL JOURNAL 112(6), 1246–1257.

  49. Rol, F., Karakashov, B., Nechyporchuk, O., Terrien, M., Meyer, V., Dufresne, A., Belgacem, M. N. and Bras, J. [2017], ‘Pilot-scale twin screw extrusion and chemical pretreatment as an energyefficient method for the production of nanofibrillated cellulose at high solid content’, ACS SUSTAINABLE CHEMISTRY & ENGINEERING 5(8), 6524–6531.

  50. Saini, S., Belgacem, M. N. and Bras, J. [2017], ‘Effect of variable aminoalkyl chains on chemical grafting of cellulose nanofiber and their antimicrobial activity’, MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS 75, 760–768.

  51. Saini, S., Quinot, D., Lavoine, N., Belgacem, M. N. and Bras, J. [2017], ‘beta-cyclodextrin-grafted tempo-oxidized cellulose nanofibers for sustained release of essential oil’, JOURNAL OF MATERIALS SCIENCE 52(7), 3849–3861.

  52. Sentis, D. F., Cochereau, T., Orgeas, L., Dumont, P. J. J., du Roscoat, S. R., Laurencin, T., Terrien, M. and Sager, M. [2017], ‘Tensile behaviour of uncured sheet moulding compounds: Rheology and flowinduced microstructures’, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 101, 459–470.

  53. Shao, Y., Guizani, C., Grosseau, P., Chaussy, D. and Beneventi, D. [2017], ‘Thermal characterization and kinetic analysis of microfibrillated cellulose/lignosulfonate blends’, JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS 124, 25–34.

  54. Silveira Maia, T. H., Larocca, N. M., Goncalves Beatrice, C. A., Junior de Menezes, A., Siqueira, G. d. F., Pessana, L. A., Dufresne, A., Franca, M. P. and Lucas, A. d. A. [2017], ‘Polyethylene cellulose nanofibrils nanocomposites’, CARBOHYDRATE POLYMERS 173, 50– 56.

  55. Smyth, M., Fournier, C., Driemeier, C., Picart, C., Foster, E. J. and Bras, J. [2017], ‘Tunable structural and mechanical properties of cellulose nanofiber substrates in aqueous conditions for stem cell culture’, BIOMACROMOLECULES 18(7), 2034–2044.

  56. Smyth, M., Garcia, A., Rader, C., Foster, E. J. and Bras, J. [2017], ‘Extraction and process analysis of high aspect ratio cellulose nanocrystals from corn (zea mays) agricultural residue’, INDUSTRIAL CROPS AND PRODUCTS 108, 257–266.

  57. Soriano, I., Ibraim, E., Ando, E., Diambra, A., Laurencin, T., Moro, P. and Viggiani, G. [2017], ‘3d fibre architecture of fibre-reinforced sand’, GRANULAR MATTER 19(4).

  58. Stelzenmuller, N., Polanco, J. I., Vignal, L., Vinkovic, I. and Mordant, N. [2017], ‘Lagrangian acceleration statistics in a turbulent channel flow’, PHYSICAL REVIEW FLUIDS 2(5).

  59. Sumbekova, S., Cartellier, A., Aliseda, A. and Bourgoin, M. [2017], ‘Preferential concentration of inertial sub-kolmogorov particles: The roles of mass loading of particles, stokes numbers, and reynolds numbers’, PHYSICAL REVIEW FLUIDS 2(2).

  60. van den Eijnden, A. P., Besuelle, P., Collin, F., Chambon, R. and Desrues, J. [2017], ‘Modeling the strain localization around an under- ground gallery with a hydro-mechanical double scale model; effect of anisotropy’, COMPUTERS AND GEOTECHNICS 85, 384–400.

  61. Vennat, E., Wang, W., Genthial, R., David, B., Dursun, E. and Gourrier, A. [2017], ‘Mesoscale porosity at the dentin-enamel junction could affect the biomechanical properties of teeth’, ACTA BIOMATERIALIA 51, 418–432.

  62. Wautier, A., Geindreau, C. and Flin, F. [2017], ‘Numerical homogenization of the viscoplastic behavior of snow based on x-ray tomography images’, CRYOSPHERE 11(3), 1465–1485.

  63. Wiebicke, M., Ando, E., Herle, I. and Viggiani, G. [2017], ‘On the metrology of interparticle contacts in sand from x-ray tomography images’, MEASUREMENT SCIENCE AND TECHNOLOGY 28(12).

  64. Yu, P., He, H. and Dufresne, A. [2017], ‘A novel interpenetrating polymer network of natural rubber/regenerated cellulose made by simple co-precipitation’, MATERIALS LETTERS 205, 202–205.

2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014